Transmission Control Module (TCM): Installation

Install the TCM to the bracket.
CAUTION: To avoid the damage to bracket and TCM, do not remove after installing TCM to bracket. If installed by mistake, the part must be replaced with a new part.
Install the TCM.
Tightening torque:

7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

Fig 1: Identifying Steering Column And Transmission Control Module
Courtesy of SUBARU OF AMERICA, INC.
Connect the connector to the TCM.
Install in the reverse order of removal.
Perform Clear Memory 2 operation. Refer to CLEAR MEMORY MODE , OPERATION, Subaru Select Monitor.
Execute the learning control promotion. Refer to GENERAL DESCRIPTION , Learning Control.
Perform learning control promotion. Refer to GENERAL DESCRIPTION , Learning Control.
Perform the inspection at the end of repair work, and make sure there is no problem with the shift shock.