Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 2014 >> Legacy 3.6R Limited >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> Front Differential Assembly >> Installation

Front Differential Assembly: Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. When installing the front differential assembly to the case, be careful not to damage the inside of case (particularly, the differential side retainer mating surface).
    Fig 1: Identifying Front Differential Assembly
    G08579362Courtesy of SUBARU OF AMERICA, INC.
  2. Install the O-ring to left and right side retainers.
    NOTE: Use new O-rings.
  3. Using the ST, install the side retainer. Refer to ADJUSTMENT .

    ST 18630AA010 WRENCH COMPL RETAINER

  4. Adjust the backlash of the front differential. Refer to ADJUSTMENT .
  5. Install the lock plate.

    Tightening torque: 

    25 N.m (2.5 kgf-m, 18.4 ft-lb) 

    Fig 2: Identifying Lock Plate
    G08579363Courtesy of SUBARU OF AMERICA, INC.
  6. Install the converter case to the transmission case. Refer to INSTALLATION .
  7. Install the transmission harness connector to the stay.
  8. Install the ATF cooler pipe. Refer to INSTALLATION .
  9. Install the torque converter assembly. Refer to INSTALLATION .
  10. Install the transmission assembly to the vehicle. Refer to INSTALLATION .
scientia non olet · About Brad's Car Manuals