Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 2014 >> Outback 2.5i, Standard Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control System >> Front ABS Wheel Speed Sensor >> Removal

Front ABS Wheel Speed Sensor: Removal

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Disconnect the ground cable from battery.
  2. Lift up the vehicle, and then remove the front wheels.
  3. Remove the front ABS wheel speed sensor.
    CAUTION:
    • Be careful not to damage the sensor.
    • Do not apply excessive force to the sensor harness.
    1. Disconnect the front ABS wheel speed sensor connector in the engine compartment.
      Fig 1: Locating Front ABS Wheel Speed Sensor Connector
      G07914206Courtesy of SUBARU OF AMERICA, INC.
    2. Remove each harness clip and grommet.
    3. Remove the bolts, and remove the front ABS wheel speed sensor from the front axle housing.
      Fig 2: Locating Front ABS Wheel Speed Sensor Mounting Bolt
      G08583460Courtesy of SUBARU OF AMERICA, INC.