Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 2016 >> BRZ Series.HyperBlue >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (Service Information) >> Accelerator Pedal Rod Assembly (Fa20) >> On-Vehicle Inspection

On-Vehicle Inspection

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Function inspection of accelerator pedal sensor assembly
    1. Connect the SSM3 to the DLC.
    2. Turn the ignition switch to ON.
    3. According to the display, select [ECM data monitor] →[Accelerator Sensor No1 Voltage and Accelerator Sensor No2 Voltage], and check the value when the accelerator pedal is operated.
      Fig 1: Checking Accelerator Pedal
      G10213026Courtesy of SUBARU OF AMERICA, INC.

      Voltage

      Pedal condition Accelerator No. 1 sensor voltage Accelerator No. 2 sensor voltage
      Full closed 0.5 to 0.8 V 0.5 to 0.8 V
      Full open 2.4 to 3.5 V 2.4 to 3.5 V
      Full closed →Full open →Full closed Voltage shall change continuously. Voltage shall change continuously.
scientia non olet · About Brad's Car Manuals