Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 2018 >> Outback 3.6R Touring >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control/Fuel System (H6DO) >> Throttle Body >> Installation

Throttle Body: Installation

Download the full database via torrent (~1.1 TB)
  1. Install the throttle body to the intake manifold.
    NOTE: Use a new gasket.

    Tightening torque: 

    8 N.m (0.8 kgf-m, 5.9 ft-lb)

  2. Connect the connector (A) to the throttle position sensor, and connect the preheater hose (B) to the throttle body.
    G10263531Courtesy of SUBARU OF AMERICA, INC.
  3. Install the air intake boot. Ref. to INTAKE (INDUCTION) (H6DO)>Air Intake Boot>INSTALLATION .
  4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  5. Fill engine coolant. Ref. to COOLING(H6DO)>Engine Coolant>REPLACEMENT>FILLING OF ENGINE COOLANT .
  6. Install the collector cover.
scientia non olet · About Brad's Car Manuals