| AT select lever |
Starter does not run. |
Adjust the select cable and inhibitor switch, or inspect the circuit. |
| Back-up light does not illuminate. |
Adjust the select cable and inhibitor switch, or inspect the circuit. |
| AT shift lock system does not operate normally. |
Adjust the select cable and inhibitor switch, or inspect the circuit. |
| Manual mode can not be set. |
Inspect the mode switch and select lever, or inspect the circuit. |
| Up-shift is not engaged at manual mode. |
Check the shift-up switch and circuit. |
| Down-shift is not engaged at manual mode. |
Check the shift-down switch and circuit. |