Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 2019 >> Forester Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Power Rear Gate System >> Power Rear Gate Control Module >> Installation

Power Rear Gate Control Module: Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
CAUTION: When the power rear gate CM is replaced, set the memory height function again. (Refer to the appropriate Service Information for details.)
  1. Install the power rear gate Control Module.
    NOTE: Connect the connectors in reverse order of removal.
  2. Install the trim panel rear pillar UPR LH and the trim panel assembly apron LH. Ref. to EXTERIOR/INTERIOR TRIM>REAR QUARTER TRIM>INSTALLATION .
  3. Install the rear seat cushion assembly. Ref. to SEATS>REAR SEAT>INSTALLATION .
  4. Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>BATTERY .