Reduction Driven Gear: Disassembly

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Flatten the tab of the lock nut.
Using the ST1, ST2 and ST3, counter the rotation of the reduction driven gear, and remove the lock nut.
CAUTION: Place cloth between the contacting surface of the vise and the reduction driven gear to prevent reduction driven gear damage.

Preparation tool:

ST1: PULLEY WRENCH (18355AA000)

ST2: PULLEY WRENCH PIN SET (18334AA000)

ST3: SOCKET WRENCH (35) (499987003)

Courtesy of SUBARU OF AMERICA, INC.
Remove the ball bearing using ST1, ST2 and a press.
Preparation tool:

ST1: INSTALLER (499757002)

ST2: REMOVER (498077300)

Courtesy of SUBARU OF AMERICA, INC.
Using the ST and a press, remove the parking gear and transfer drive gear.
Preparation tool:

ST: REMOVER (899864100)

Courtesy of SUBARU OF AMERICA, INC.
Remove the snap ring from reduction driven gear.