Starter Relay: Inspection
- Check that there is no deformation, cracks or other damages.
- Check the resistance between terminals.
- Starter relay
| Terminal No. | Inspection conditions | Standard |
|---|---|---|
| 3 - 4 | Always | 1 MΩ or more |
| 3 - 4 | Apply battery voltage between terminals 1 and 2. | Less than 1 Ω |
- Starter cut relay
| Terminal No. | Inspection conditions | Standard |
|---|---|---|
| 3 - 4 | Always | 1 MΩ or more |
| 3 - 4 | Apply battery voltage between terminals 1 and 2. | Less than 1 Ω |