Scavenge Pump: Installation
- Set new O-rings.
- Temporarily install the scavenge pump, and tighten the bolts.
Tightening torque:
6.4 N.m (0.7 kgf-m, 4.7 ft-lb)
- Install the oil jet.
Tightening torque:
6.4 N.m (0.7 kgf-m, 4.7 ft-lb)
- Install the crank sprocket. Ref. to MECHANICAL (H4DOTC)>Crank Sprocket>INSTALLATION .
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .