Front ABS Wheel Speed Sensor: Installation
CAUTION:
- Be careful not to damage the sensor.
- Do not apply excessive force to the sensor harness.
- Install the sensor sub assembly front.
Tightening torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the front wheels.
Tightening torque:
120 N.m (12.2 kgf-m, 88.5 ft-lb)
- Lower the vehicle.NOTE: Check if the harness is not pulled and does not come in contact with the suspension or body while operating the steering.
- Connect the ground terminal to battery sensor. Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION .