Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 2021 >> Outback Base >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System >> Light Control Sensor >> Inspection

Light Control Sensor: Inspection

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Connect the connector.
  2. Turn the ignition switch to ON, and set the lighting switch to the AUTO position.
  3. Measure the voltage between connector terminals.
    G13951912Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Standard
    2 (+) - 1 (-) Measure the voltage when the area around the auto light sensor, which was dark, becomes bright. Dark condition: Approx. 0.6 V or less
    Bright condition: Approx. 3 V or more
  4. Replace the auto light sensor if the inspection result is not within the standard value.