Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 2021 >> Outback Limited XT >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle System (Tr690) >> Transmission Control Module (TCM) >> Removal

Transmission Control Module (TCM): Removal

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
CAUTION:
  • When replacing the TCM, be sure to perform [Start count reading ECU to SSM] before operation and perform [Start count writing SSM to ECU] after operation. Ref. to AUTO START STOP (DIAGNOSTICS)>WORK SUPPORT>NOTE .
  • When [Start count reading ECU to SSM] cannot be performed due to TCM malfunction, be sure to replace the starter and fuel pump relay at the same time.

Starter: 

Ref. to STARTING/CHARGING SYSTEMS (H4DOTC)>STARTER .

Fuel pump relay: 

Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>FUEL PUMP RELAY .

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Move the lock lever (B) in the arrow direction while pressing the lock button (A), and disconnect the connector.
    G13951091Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the TCM.
G13951092Courtesy of SUBARU OF AMERICA, INC.