Fuel Pump Control Unit: Installation

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.

Install the fuel pump control module, and connect the connector.
Tightening torque:

5 N.m (0.5 kgf-m, 3.7 ft-lb)
Install the trim panel trunk side RH. Ref. to EXTERIOR/INTERIOR TRIM>TRUNK ROOM TRIM>INSTALLATION
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY