Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 2023 >> Ascent Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle System >> Transmission Mounting System >> Installation >> Pitching Stopper

Pitching Stopper

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Install the pitching stopper bracket.
    1. Install the pitching stopper bracket.

      Tightening torque: 

      41 N.m (4.2 kgf-m, 30.2 ft-lb)

      G13621925Courtesy of SUBARU OF AMERICA, INC.
    2. Install the bolts which secure the CVTF cooler pipe No. 1.

    Tightening torque: 

    16 N.m (1.6 kgf-m, 11.8 ft-lb)

  2. Install the pitching stopper.
    NOTE: Install with the front mark (a) facing towards the front of the vehicle.

    Tightening torque: 

    T1: 50 N.m (5.1 kgf-m, 36.9 ft-lb)

    T2: 58 N.m (5.9 kgf-m, 42.8 ft-lb)

    Fig 1: Pitching Stopper Bolts With Torque Specification
    G13621930Courtesy of SUBARU OF AMERICA, INC.
  3. Install the pitching stopper plate.

    Tightening torque: 

    18 N.m (1.8 kgf-m, 13.3 ft-lb)

  4. Connect the ground cord.
    1. Connect the coupling connector.
    2. Install the clips.
  5. Connect the air breather hose to the clip.
  6. Install the intercooler. Ref. to INTAKE (INDUCTION) (H4DOTC)>INTERCOOLER>INSTALLATION .