Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 2023 >> Ascent Base >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Select Cable >> Removal

Select Cable: Removal

Download the full database via torrent (~1.1 TB)
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Release the shift lock and shift the select lever to the "N range". Ref. to CONTROL SYSTEMS>SELECT LEVER>REMOVAL .
  3. Remove the center exhaust cover (front). Ref. to EXHAUST (H4DOTC)>REAR EXHAUST PIPE>REMOVAL .
  4. Disconnect the select cable from the transmission main body.
    CAUTION: Do not apply excessive load while holding the part (a).
    G14602401Courtesy of SUBARU OF AMERICA, INC.
    G14602402Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the adjusting nut (rear).
    G14602403Courtesy of SUBARU OF AMERICA, INC.
  6. Raise the claw of clamp and remove the select cable together with the clamp.
    CAUTION: Do not apply excessive load while holding the part (a).
    G14602404Courtesy of SUBARU OF AMERICA, INC.
    G14602405Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the clamp from the select cable.
  8. Remove the cable plate.
    G14602406Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Brad's Car Manuals