Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 2024 >> Ascent Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle System >> Primary Pressure Sensor >> Installation

Primary Pressure Sensor: Installation

Download the full database via torrent (~1.1 TB)
CAUTION: If water or oil contacts the connector terminal of primary pressure sensor, replace it with a new part.
  1. Install a new O-ring.
    NOTE: Apply CVTF to the O-rings.
  2. Install the primary pressure sensor and connect the connector.

    Tightening torque: 

    13 N.m (1.3kgf-m, 9.6ft-lb)

  3. Install the transmission body.CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>TRANSMISSION ASSEMBLY>INSTALLATION 
scientia non olet · About Brad's Car Manuals