Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 2024 >> Ascent Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle System >> Primary Speed Sensor >> Installation

Primary Speed Sensor: Installation

Download the full database via torrent (~1.1 TB)
CAUTION: If water or oil contacts the connector terminal of primary speed sensor, replace it with a new part.
  1. Install the primary speed sensor using a new O-ring, and connect the connector.
    NOTE: Apply CVTF to the O-rings.

    Tightening torque: 

    7 N.m (0.7kgf-m, 5.2ft-lb)

  2. Install the intercooler. Ref. to INTAKE (INDUCTION) (H4DOTC)>INTERCOOLER>INSTALLATION .
  3. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About Brad's Car Manuals