Starter Specifications
STARTER SPECIFICATIONS
| Application | Specification | |||
|---|---|---|---|---|
| Brush Minimum Length | .45" (11.5 mm) | |||
| Commutator Outside Diameter | ||||
| Standard Diameter | 1.26" (32.0 mm) | |||
| Wear Limit | 1.22" (31.0 mm) | |||
| Armature Maximum Runout | .015" (.40 mm) | |||
| Insulator Depth | ||||
| Standard Depth | .015-.023" (.40-.60 mm) | |||
| Wear Limit | .008" (.20 mm) | |||
| Cold Cranking Amperage & Voltage | (1) | |||
| No-Load Maximum Current Draw At 11 Volts | 60 Amps | |||
|
||||