Sidekick 1.8L

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Disconnect ignitor harness connectors and remove ignitor. Using DVOM, connect leads to ignitor and check for continuity between specified terminals of corresponding cylinders. See IGNITOR CONTINUITY table. See Fig 1 . Replace ignitor if continuity is not as specified.

IGNITOR CONTINUITY

Positive Lead

Negative Lead

Continuity

⁽¹⁾ Yes

⁽¹⁾	Ohmmeter reading should be other than zero or infinity.

Fig 1: Testing Ignitor (Sidekick 1.8L)

Courtesy of SUZUKI OF AMERICA CORP.