Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Suzuki >> 2006 >> Reno Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Performance - DTC P0532 - P1166 >> DTC P0604: Control Module Random Access Memory (RAM) >> Troubleshooting

DTC P0604: Control Module Random Access Memory (RAM): Troubleshooting

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
TROUBLESHOOTING CHART

Step Action Value(s) Yes No
1 Perform an On-Board Diagnostic (OBD) System Check. Is the system check complete? - Go to Step 2 Go to On-Board Diagnostic (OBD II) System Check
2 Replace the Engine Control Module (ECM).
Is the replacement complete?
- Go to Step 3 -
3
  1. Using the scan tool, clear the DTCs.
  2. Start the engine and idle at normal operating temperature.
  3. Operate the vehicle within the conditions for setting this DTC as specified in the supporting text.

Does the scan tool indicate that this diagnostic has run and passed?
- Go to Step 4 Go to Step 2
4 Check if any additional DTCs are set.
Are any DTCs displayed that have not been diagnosed?
- Go to applicable DTC table System OK