Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Suzuki >> 2008 >> XL7 Base, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Electrical Devices >> Repair Instructions >> Crankshaft Position Sensor Replacement >> Installation Procedure

Installation Procedure

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
Fig 1: Identifying Crankshaft Position Sensor Bolt
G05469875Courtesy of SUZUKI OF AMERICA CORP.
  1. Install the crankshaft position sensor.
    CAUTION: Refer to FASTENER NOTICE .
  2. Install the crankshaft position sensor bolt.

    Tightening torque 

    Tighten the bolt to 10 N.m (89 lb in). 

    Fig 2: Identifying Engine Wiring Harness Electrical Connector
    G05469876Courtesy of SUZUKI OF AMERICA CORP.
  3. Connect the engine wiring harness electrical connector to the CKP sensor.
  4. If equipped with all AWD, install the transfer case. Refer to TRANSFER CASE ASSEMBLY REPLACEMENT .
  5. Lower the vehicle.
scientia non olet · About Brad's Car Manuals