Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Suzuki >> 2010 >> SX4 2WD L4-2.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Knock Sensor >> Service and Repair

Knock Sensor: Service and Repair

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
Knock Sensor Removal and Installation

Removal
1. Disconnect negative cable from battery.
2. Hoist vehicle.
3. Disconnect knock sensor connector.
4. Remove knock sensor (1) from cylinder block.

Installation
Reverse removal procedure noting the following.
- Install knock sensor (1) as shown in figure.
- Tighten knock sensor bolt (2) to specified torque.

Tightening torque
Knock sensor bolt (a): 25 N.m (2.5 kg-m, 18.5 lbf-ft)