Engine Control Module: Testing and Inspection

Procedure After Replacing ECM

When replacing ECM, the following procedure must be performed.
1) Perform initialization of immobilizer system and registration of all immobilizer system ignition key IDs. Refer to [ECM Re-Communicating Function: Special Repair Requirement] Special Repair Requirement.
2) Perform [VIN Registration] VIN Registration.
3) Perform [Accelerator Pedal Released Position Learning] Testing and Inspection.
4) Perform [Throttle Valve Closed Position Learning] Throttle Valve Closed Position Learning.
5) Perform [Idle Air Volume Learning] Idle Air Volume Learning.