Module - Intrusion Sensor - Remove And Replace: Removal
- Remove the headliner Headliner (Remove And Replace)
- Place the headliner on a clean work surface with the upholstered side facing down.
- Disconnect the headliner electrical harness from the intrusion sensor module connector.
 Courtesy of TESLA, INC.
|
- Disconnect the intrusion sensor electrical harness connectors (x2) from the intrusion sensor module.
 Courtesy of TESLA, INC.
|
- Release the clips (x2) that attach the intrusion sensor module to the headliner, and then remove the module from the headliner.
 Courtesy of TESLA, INC.
|