Module - Steering Column Control - Remove and Replace: Notes

Last modified: 30/11/2023 01:57:37

Fig 1: Steering Column Control Module Component Location

Courtesy of TESLA, INC.

NOTE: See Personal Protection to make sure to wear proper PPE when performing below procedure.

Revision History:

2023-11-30: Replaced Toolbox routine "PROC-VCLEFT_X_STEERING-COLUMN-CALIBRATION" with "PROC_STEERING_COLUMN_CALIBRATION".
2023-08-28: Updated Toolbox routines to be run after SCCM installation.