Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Toyota >> 1985 >> Celica ST >> Repair and Diagnosis >> Engine Performance >> System >> EGR Function Testing >> Component Testing >> Vacuum Modulator

Vacuum Modulator

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Disconnect vacuum hoses from ports "P", "Q" and "R" of vacuum modulator. Plug ports "P" and "R" (2 ports on same side) and blow through port "P" (single port on opposite side). Air should escape freely from filter.
  2. Start engine and run at 2000 RPM on Camry and 3000 RPM on Celica. Repeat blowing test. There should be strong resistance to air flow through modulator. If not, replace modulator. Reconnect vacuum hoses to proper locations.
scientia non olet · About Brad's Car Manuals