VCV Valve No. 1

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Remove VCV valve. See Fig 1. Apply 11.81 in. Hg (26.7 kPa) to port "S". See Fig 2. Blow air into port "Y" and ensure VCV opens. Release vacuum. Blow air into port "Y" and ensure VCV closes. If valve fails to operate as specified, it must be replaced.

Fig 1: Location of No. 1 VCV Valve

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Checking No. 1 VCV Valve

Fig 3: Location of No. 2 VCV Valve