Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Toyota >> 1988 >> 4Runner Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Computer Control System >> Component Testing >> Turbocharging Pressure Sensor >> Power Source

Power Source

Download the full database via torrent (~1.1 TB)

Turn ignition on. Disconnect turbocharging pressure sensor connector and measure voltage between terminals "VC" and "E2" of harness connector. See Fig 1. Voltage should be 4-6 volts.

Fig 1: Measuring Voltage To Turbocharging Pressure Sensor
G95411Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Brad's Car Manuals