Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Toyota >> 1990 >> Corolla Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing - EFI >> Ignition Checks (Supra Turbo) >> Ignition System Connection Checks

Ignition System Connection Checks

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. With ignition switch in OFF position, check connections of all 3 ignition coil primary circuits. Check for loose connections or corrosion. Tighten and/or clean connections as required.
  2. Check connection on primary feed wire to coil and ignitor. If loose or corroded connections exist, correct them and repeat SPARK TEST.
  3. If no spark output is observed or no problems were located and resolved in this test, proceed to IGNITION FEED CIRCUIT TEST under IGNITION COIL in this article.
scientia non olet · About Brad's Car Manuals