Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Toyota >> 1990 >> Cressida >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Erasing Abs Codes

Erasing Abs Codes

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Turn ignition on. On Celica (except All-Trac), remove bolt and remove control relay. Disconnect check connector from control relay. On all models (except Cressida), disconnect actuator check connector. On Cressida, connect a jumper wire between terminals No. E1 and Tc of the diagnostic communication link. See Figure.
  2. Ensure vehicle does not move during procedure. To clear diagnostic codes, depress brake pedal 8 or more times within 3 seconds. "ANTI-LOCK" warning light should show a normal code. Warning light should blink once every .5 second.
  3. On Celica (except All-Trac), connect control relay check connector. Ensure "ANTI-LOCK" light goes out. Install control relay and relay bolt. On all other models (except Cressida), connect actuator check connector. On Cressida, disconnect jumper wire between terminals No. E1 and Tc of the diagnostic communication link. Ensure "ANTI-LOCK" light goes out.