Neutral/Start Switch Test

Download the full database via torrent (~1.1 TB)

Unplug switch connector at transmission or transaxle. Note terminal identification. See Fig 1. Using ohmmeter, check for continuity at specified terminals with gearshift in correct range. See NEUTRAL/START SWITCH SPECIFICATIONS table.

NEUTRAL/START SWITCH SPECIFICATIONS CRESSIDA

Gearshift Position	Terminal Continuity
"P"	B & N, C & PB
"R"	C & RB
"N"	B & N, C & NB
"D"	C & DB
"2"	C & 2B
"L"	C & LB

Fig 1: Neutral/Start Switch Terminal ID - Cressida