Starter Specifications
NIPPONDENSO STARTER SPECIFICATIONS
| Application | Specification | |
|---|---|---|
| Brush Minimum Length | ||
| Reduction 1.0 kW | .335" (8.5 mm) | |
| Conventional 0.8 kW | .394" (10.0 mm) | |
| Brush Spring Load | ||
| Reduction 1.0 kW | 3.9-5.3 Lbs. (18-24 N) | |
| Conventional 0.8 kW | 2.2-3.5 Lbs. (10-16 N) | |
| Commutator Minimum Diameter | ||
| 0.8 kW | 1.06" (27 mm) | |
| 1.0 kW | 1.14" (29.0 mm) | |
| Commutator Minimum Undercut Depth | .008" (.2 mm) | |
| Commutator Runout | .002" (.05 mm) | |
| Armature | ||
| Core Runout | .002" (.05 mm) | |
| End Play | .002" (.05 mm) | |