Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Toyota >> 1995 >> Avalon XL >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks (DISTRIBUTORLESS Ignition System) >> Ignition Coil Resistance

Ignition Coil Resistance

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Disconnect negative battery cable. Remove cover located above ignition coils. Disconnect electrical connectors from ignition coils.
  2. Using ohmmeter, measure ignition coil primary resistance between positive (+) and negative (-) terminals of each ignition coil. These are the terminals that electrical connector was installed on.
  3. Replace ignition coil if primary resistance is not .54-.84 ohms at 14-122°F (-10-50°C) and .68-.98 ohms at 122-212°F (50-100°C). Ignition coil secondary resistance cannot be measured. Reinstall electrical connectors on ignition coils, cover and negative battery cable.
scientia non olet · About Brad's Car Manuals