Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Toyota >> 1995 >> Avalon XLS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks (DISTRIBUTORLESS Ignition System) >> Ignition Coil Resistance

Ignition Coil Resistance

Download the full database via torrent (~1.1 TB)
  1. Disconnect negative battery cable. Remove cover located above ignition coils. Disconnect electrical connectors from ignition coils.
  2. Using ohmmeter, measure ignition coil primary resistance between positive (+) and negative (-) terminals of each ignition coil. These are the terminals that electrical connector was installed on.
  3. Replace ignition coil if primary resistance is not .54-.84 ohms at 14-122°F (-10-50°C) and .68-.98 ohms at 122-212°F (50-100°C). Ignition coil secondary resistance cannot be measured. Reinstall electrical connectors on ignition coils, cover and negative battery cable.
scientia non olet · About Brad's Car Manuals