Throttle Body: Installation

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

INSTALL THROTTLE BODY
1. Install the throttle body and accelerator cable bracket with the bolt and 2 nuts.
  Torque: 30 N.m (305 kgf.cm, 22 ft.lbf)
2. Connect the 2 water bypass hoses to the throttle body.
  
  Fig 1: Connecting Water Bypass Hoses To Throttle Body
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the IAC valve connector.
4. Connect the throttle position sensor connector.
5. Connect the PCV hose to throttle body.
INSTALL AIR CLEANER HOSE AND CAP
FILL RADIATOR WITH ENGINE COOLANT

Fig 2: Connecting IAC Valve Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002