Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Toyota >> 2004 >> Matrix Base, 4WD >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> On-Vehicle Testing >> Starter Relay Test

Starter Relay Test

Download the full database via torrent (~1.1 TB)
  1. Remove starter relay box cover.
  2. Remove starter relay located in engine compartment junction block. Starter relay is marked "ST".
  3. Using an ohmmeter, verify continuity between relay terminals No. 1 and 2. See Fig 1. Continuity should not exist between terminals No. 3 and 5. If continuity is not as specified, replace relay.
  4. Check relay operation by applying battery voltage through terminals No. 1 and 2. See Fig 1. Continuity should now exist between terminals No. 3 and 5. If relay does not test as indicated, replace relay.
  5. Install starter relay
  6. Install starter relay box cover.
Fig 1: Testing Starter Relay
G93A82271Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Brad's Car Manuals