Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Toyota >> 2004 >> RAV4 Base, FWD, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> SFI System >> Fuel Pressure Pulsation Damper >> Replacement

Fuel Pressure Pulsation Damper: Replacement

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. REMOVE AIR CLEANER HOSE 
  2. DISCONNECT ACCELERATOR CABLE 
  3. REMOVE FUEL PRESSURE PULSATION DAMPER 
    1. Disconnect the fuel tube connector (metallic connector) (see SFI SYSTEM ).
      CAUTION:
      • Disconnect the fuel tube connector (metallic connector) after observing the precautions.
      • As there is retained pressure in the fuel pipe line, prevent it from splashing inside the engine compartment.
    2. Remove the 2 bolts and pulsation damper.
  4. REINSTALL FUEL PRESSURE PULSATION DAMPER 
    1. Install the pulsation damper with the 2 bolts.

      Torque: 9 N.m (90 kgf.cm, 80 in.lbf) 

      2. Fig 1: Removing/Installing Bolts & Pulsation Damper
      G02639432Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the fuel tube connector (metallic connector) (see SFI SYSTEM ).
  5. RECONNECT ACCELERATOR CABLE 
  6. RECONNECT AIR CLEANER HOSE 
scientia non olet · About Brad's Car Manuals