Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Toyota >> 2005 >> Sequoia Limited, RWD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Engine Ignition System >> Crankshaft Position Sensor >> Removal

Crankshaft Position Sensor: Removal

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. REMOVE ENGINE UNDER COVER 
  2. REMOVE CRANKSHAFT POSITION SENSOR 
    1. Disconnect the crankshaft position sensor connector.
    2. Remove the bolt and crankshaft position sensor.
    Fig 1: Removing Crankshaft Position Sensor
    G02650773Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002