Engine Control System: ECM: Installation
- INSTALL ECM
- Install the ECM bracket No. 2 to the ECM with the 2 screws.
- Install the ECM bracket to the ECM with the 2 screws.
- Install the ECM with the 2 nuts and bolt.
Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
- Connect the 5 connectors to the ECM.
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
- INSTALL INSTRUMENT PANEL UNDER COVER SUBASSEMBLY NO.2
- INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH
- INSTALL FRONT DOOR SCUFF PLATE RH
- PERFORM SYSTEM INITIALIZE
Some systems need initialization when disconnecting the battery terminal.