Input Shaft: Reassembly

INSTALL INPUT SHAFT THRUST BEARING RACE
1. Apply ATF WS to the sliding surfaces of the bearing and install the 2 input shaft thrust bearing races and input shaft thrust needle roller bearing.
  
  Fig 1: Installing Input Shaft Thrust Bearing Race And Needle Roller Bearing
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL PLANETARY SUN GEAR SUB-ASSEMBLY
1. Apply ATF WS to the bush and install the planetary sun gear to the input shaft.
  
  Fig 2: Installing Planetary Sun Gear To Input Shaft
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002