Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Toyota >> 2006 >> Sequoia Limited, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> Circuit Opening Relay >> On-Vehicle Inspection

On-Vehicle Inspection

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. REMOVE RELAY BOX COVER 
  2. REMOVE CIRCUIT OPENING RELAY 
  3. INSPECT CIRCUIT OPENING RELAY CONTINUITY 
    1. Using an ohmmeter, check that there is continuity between terminals 1 and 2.

      If there is no continuity, replace the relay.

    2. Check that there is no continuity between terminals 3 and 5.

      If there is continuity, replace the relay.

      Fig 1: Checking Circuit Opening Relay Continuity Between Terminals 1 And 2
      G04507048Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSPECT CIRCUIT OPENING RELAY OPERATION 
    1. Apply battery positive voltage across terminals 1 and 2.
    2. Using an ohmmeter, check that there is continuity between terminals 3 and 5.

      If there is no continuity, replace the relay.

  5. REINSTALL CIRCUIT OPENING RELAY 
  6. REINSTALL RELAY BOX COVER 
    Fig 2: Checking Circuit Opening Relay Continuity Between Terminals 3 And 5
    G04507049Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002