Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Toyota >> 2006 >> Sequoia Limited, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> Fuel Pump Relay >> On-Vehicle Inspection

On-Vehicle Inspection

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. REMOVE RELAY BOX COVER 
  2. REMOVE FUEL PUMP RELAY 
  3. INSPECT FUEL PUMP RELAY CONTINUITY 
    1. Using an ohmmeter, check that there is continuity between terminals 1 and 2.

      If there is no continuity, replace the relay.

    2. Check that there is continuity between terminals 3 and 4.

      If there is no continuity, replace the relay.

      Fig 1: Checking Fuel Pump Relay Continuity Between Terminals 1 And 2
      G04507050Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSPECT FUEL PUMP RELAY OPERATION 
    1. Apply battery positive voltage across terminals 1 and 2.
    2. Using an ohmmeter, check that there is no continuity between terminals 3 and 4.

      If there is continuity, replace the relay.

  5. REINSTALL FUEL PUMP RELAY 
  6. REINSTALL RELAY BOX COVER 
    Fig 2: Checking Fuel Pump Relay Continuity Between Terminals 3 And 4
    G04507051Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002