Crankshaft Position Sensor: Inspection

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

INSPECT CRANKSHAFT POSITION SENSOR

Check the resistance.

Using an ohmmeter, measure the resistance between the terminals.

Standard resistance

RESISTANCE SPECIFICATION TABLE

Temperature	Specified Condition
Cold	985 to 1,600 Ω
Hot	1,265 to 1,890 Ω

Fig 1: Measuring Resistance Between Crankshaft Position Sensor Terminals Using Ohmmeter

HINT:

In RESISTANCE SPECIFICATION TABLE , the terms Cold and Hot refer to the temperature of the coils. Cold means approximately -10 to 50°C (14 to 122°F). Hot means approximately 50 to 100°C (122 to 212°F).

If the resistance is not as specified, replace the crankshaft position sensor.