Window Defogger Wire: Repair

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

IF NECESSARY, REPAIR DEFOGGER WIRE
1. Clean the broken wire tips with grease, wax and silicone remover.
2. Place masking tape along both sides of the wire.
  
  Fig 1: Placing Masking Tape Along Both Sides Of Wire
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Thoroughly stir the repair agent ("DuPont" paste No. 4817 or the equivalent).
4. Using a fine tip brush, apply a small amount of the agent to the wire.
5. After a few minutes, remove the masking tape.
  NOTE: Do not repair the defogger wire again for at least 24 hours after removing the masking tape.
  
  Fig 2: Applying Small Amount Of Agent To Wire
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002