Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Toyota >> 2007 >> FJ Cruiser RWD >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Ignition Switch >> Installation

Ignition Switch: Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. INSTALL IGNITION SWITCH ASSEMBLY 
    1. Connect the connector.
    2. Install the ignition switch with the 2 screws.
      Fig 1: Identifying Ignition Switch Screws
      G05109970Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf) 

scientia non olet · About Brad's Car Manuals