Back Door Glass: Installation

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

INSTALL BACK DOOR GLASS
Torque: 12 N*m (122 kgf*cm, 9 ft.*lbf)
INSTALL BACK DOOR HINGE ASSEMBLY RH
INSTALL BACK DOOR HINGE ASSEMBLY LH
INSTALL BACK DOOR GLASS
INSTALL WINDSHIELD WIPER MOTOR ASSEMBLY
INSTALL RR WIPER MOTOR COVER
INSTALL W/WASHER PACKING NUT REAR WIPER LINK PIVOT
INSTALL REAR WIPER LINK CAP
INSTALL REAR WIPER ARM ASSEMBLY
INSTALL BACK DOOR PANEL SUB-ASSEMBLY UPPER OUTER
1. If planning to reuse the back door panel upper outer: Clean the back door panel upper outer.
  1. Remove the adhesive tape from the back door panel upper outer.
  2. Wipe off the stains with cleaner.
2. Apply new adhesive tape to the back door panel upper outer as shown in the illustration.
3. Install the back door panel upper outer with the 4 screws and 4 nuts.
  
  Fig 1: Identifying Adhesive Tape On Back Door Panel Upper Outer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002