Inspection Procedure

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

RESET POWER WINDOW REGULATOR MOTOR FRONT LH (DRIVER SIDE)
1. Reset the power window regulator motor (see INITIALIZATION ).
2. Check if the power window AUTO UP / DOWN function operates normally.
  OK : AUTO UP / DOWN function operates normally.
NG : OTHER PROBLEM

OK : GO TO NEXT STEP
CHECK JAM PROTECTION FUNCTION OPERATING RANGE
1. Check that the jam protection function operates normally (see DIAGNOSIS SYSTEM ).
  HINT:
  
  The jam protection function does not operate from the fully closed position of the door glass to 4 mm (0.16 in.) below that.
  
  OK : Jam protection function operates normally.
NG : REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY

OK : END