Inspection Procedure

PERFORM INITIALIZATION (APPLICABLE LOCATION)
1. Initialize the power window regulator motor (See INITIALIZATION ).

CHECK FOR DTC

Check for DTCs (See DTC CHECK/CLEAR ).

Result

DTC RESULT REFERENCE

Result	Proceed To
B2313 is not output	A
B2313 output from front power window regulator motor LH	B
B2313 output from front power window regulator motor RH	C
B2313 output from rear power window regulator motor LH	D
B2313 output from rear power window regulator motor RH	E

B: REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (See REMOVAL )

C: REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH (See REMOVAL )

D: REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (See REMOVAL )

E: REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH (See REMOVAL )

A: END