Rear Speed Sensor: Inspection

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

INSPECT REAR SPEED SENSOR

Disconnect the rear speed sensor connector.
Measure the resistance according to the value (s) in the table below.

Resistance:

LH

RESISTANCE SPECIFICATION

Tester Connection	Specified Condition
K13-1 (RL+) - K13-2 (RL-)	Below 2.2 kΩ
K13-1 (RL+) - Body ground	10 kΩ or higher
K13-2 (RL-) - Body ground	10 kΩ or higher

Fig 1: Inspecting Rear Speed Sensor

G06128779

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

RH

RESISTANCE SPECIFICATION

Tester Connection	Specified Condition
M8-1 (RR+) - M8-2 (RR-)	Below 2.2 kΩ
M8-1 (RR+) - Body ground	10 kΩ or higher
M8-2 (RR-) - Body ground	10 kΩ or higher